Aspect Switching - Hitachi 49C32 Owner's Manual

Aspect Switching

You can change the picture size being displayed — Normal, Wide, Auto mode (TV
input), or Just Scan (HDMI inputs).
Selecting the picture size
1
Press ASPECT on the remote control.
2
Repeatedly press ASPECT to select the desired aspect ratio, as described below.
NOTE:
• Selectable aspect ratios may vary depending on the input source or broadcast signal.
Normal
In some cases, the image will display the
size of standard 4:3 with black side bars.
Wide
Displays the picture at the maximum size.
Auto
Displays the picture in it's original format.
Just Scan
Displays the picture in it's original format
with no overscan.
30