Cc Advanced; Aspect Switching - Hitachi L40A105E Owner's Manual

CC advanced

When you have selected Custom as the display method, you
can adjust the various setting listed below as follows:
This feature is designed to customize Digital Captions only.
1
Select "Setup ⇒ Closed Captions", then press ▶ or ENTER.
2
Press ◀ or ▶ to set "CC Display" to "On".
3
Press ▲ or ▼ to select "Digital CC Preset", then press ◀ or ▶
to select "Custom".
4
Press ▲ or ▼ to select "CC Advanced", then press ▶ or
ENTER.
The CC Advanced menu will appear.
5
Press ▲ or ▼ to select the desired item, then press ◀ or ▶ to
change the setting.
CC Advanced
Text Size
Text Type
Text Edge
Text Color
Text Opacity
Background Color
Background Opacity
You can select from among the following items and
parameters.
Text Size: Auto, Small, Standard, Large
Text Type: Auto, Style1, Style2, Style3, Style4, Style5,
Style6, Style7
Text Edge: Auto, None, Raised, Depressed, Uniform, Left
Shadow, Right Shadow
Text Color: Auto, Black, White, Red, Green, Blue, Yellow,
Magenta, Cyan
Text Opacity: Auto, Solid, Transparent, Translucent,
Flashing
Background Auto, Black, White, Red, Green, Blue, Yellow,
Color: Magenta, Cyan
Background Auto, Solid, Transparent, Translucent,
Opacity: Flashing
NOTE:
• You cannot set both "Text Color" and "Background Color" as a
same color.
• You cannot set both "Text Opacity" and "Background Opacity" to
"Transparent".

Aspect Switching

You can display the image at its optimum condition by
selecting display aspect.
Selecting the picture format aspect ratio
1
Select "Video ⇒ Aspect", then press ▶ or ENTER to display
"Aspect" menu.
2
Press ▲ or ▼ or corresponding Number buttons (0-4) to
select the desired picture format aspect ratio, as described
below.
Aspect
0.Natural
1.Cinema Wide1
2.Cinema Wide2
3.Cinema Wide3
4.Full
EN 20
Auto
Auto
Auto
Auto
Auto
Auto
Auto
NOTE:
• Selectable picture format aspect ratios may vary depending on
the input source or broadcast signal.
• Aspect menu also can be displayed by pressing ASPECT on
the remote control.
Natural
In some cases, this image will display the size of standard 4:3 with
a black side bar.
Cinema Wide1 (for 4:3 format programs)
To fill the screen, the right and left edges are extended. However,
the center of the picture remains near its former ratio.
The top and bottom edges of the picture may be hidden.
Cinema Wide2 (for letter box programs)
The entire picture is uniformly enlarged-it is stretched the same
amount both wider and taller (retains its original proportion).
The top and bottom edges of the picture may be hidden.
Cinema Wide3 (for letter box programs with subtitles)
To fill the width of the screen, it is extended horizontally. However,
it is only slightly extended at the top and the bottom.
The top and bottom edges of the picture may be hidden.
Full (for 16:9 source programs)
Full will display the picture at the maximum size.
Native (for PC mode only)
Detects the resolution of the signal of the image and it will be shown
on the screen with same amount of pixels.
NOTE:
• Some High Definition and/or Digital broadcasts may not allow
you to change the picture format aspect ratio.
• In HDMI or COMPONENT mode with a scanning rate of 720p,
1080i or 1080p (only HDMI), only the Cinema Wide2 and Full
are available.
• In PC mode, only the Natural, Full and Native are available. In
PC mode (WXGA, WXGA+, FHD), only the Full and Native are
available.
• When the PC connected to the HDMI terminal and 1920x1080
resolution (FHD) is selected, the top and bottom, right and left
edges of the picture may be hidden on all picture sizes.