Craftsman C459-52102 Operator's Manual page 6

SAFETY LABELS
A chute clean-out tool is fastened to the top
Chute Clean-out
of the auger housing with a mounting clip. The
Tool
tool is designed to clear a chute assembly of
ice and snow.
This item is fastened with a cable tie at the
factory. Cut the cable tie before operating the
snow thrower.
6
CS00071
WARNING: Never use your
hands to clear a clogged chute
assembly. Shut off engine and
remain behind handles until
all moving parts have stopped
before using the clean-out tool
to clear the chute assembly.