Starting Engine - Tao Motor Boulder B1 Owner's Manual

STARTING ENGINE (COLD)
1. Set the parking brake. (The engine can be started only when the front / rear brake lever is applied.)
2. Turn the fuel valve lever to the "ON" position.
3. Turn the ignition key to the "ON" position.
4. Set "RUN" position on main switch.
5. Set the choke lever to cold start position (all the way up).
6. Press and hold the start button until the engine starts. Never hold the start button for more than 10
seconds per try. It may be necessary to push the throttle lever a small amount to start the engine.
7. When engine warms up, move the choke lever down. Choke lever must be in the off position (all the way to
the down) in order to operate the ATV.
8. Release the parking brake.
STARTING ENGINE (WARM)
1. Set the parking brake. (The engine can be started only when the front / rear brake
lever is applied).
2. Turn the fuel valve lever to the"ON" position.
3. Turn the ignition key to the "ON" position.
4. Set "RUN" position on main switch.
5. Set the choke lever to warm start position (all the way to down).
6. Press and hold the start button until the engine starts. Never hold the start button more than 10 seconds per
try. It may be necessary to push the throttle lever a small amount to start the engine.
7. Release the parking brake.
20