Starting Engine - Tao Motor BULL 150 Owner's Manual

STARTING ENGINE (COLD)
1. Set the parking brake. (The engine can be started only when the front / rear brake lever is applied)
2. Turn the fuel valve lever to the "ON" position.
3. Turn the ignition key to the "ON" position.
4. Set "RUN" position on main switch.
5. Set gear box to neutral position. The neutral position light will illuminate on instrument cluster.
6. Press and hold the start button until the engine starts. Never hold the start button for more than 10 seconds per try. It may be
necessary to push the throttle lever a small amount to start the engine.
7. Release the parking brake.
STARTING ENGINE (WARM)
1. Set the parking brake. (The engine can be started only when the front / rear brake lever is applied)
2. Turn the fuel valve lever to the "ON" position.
3. Turn the ignition key to the "ON" position.
4. Set "RUN" position on main switch.
5. Set gear box to neutral position. The neutral position light will illuminate on instrument cluster.
6. Press and hold the start button until the engine starts. Never hold the start button more than 10 seconds per try. It may be necessary
to push the throttle lever a small amount to start the engine.
7. Release the parking brake.
TIP
The design of this ATV is utilizing an automatic choke. No choke lever is needed.
18