Windows 2000 - Epson Stylus C86 Start Here Manual

Windows 2000

1
Make sure your printer is connected and turned on.
Then turn on your computer.
2
Wait for Windows to detect your printer and display a screen like this:
DON'T CLICK ANY BUTTONS ON THIS
Note: If a screen like this doesn't appear, make sure your printer
is turned on and connected.
3
Put the Epson CD in your CD-ROM or DVD drive and wait
a few seconds for the CD to be recognized.
4
Click Next on the Found New Hardware Wizard screen.
5
When you see this sceen, click the Search for option, then
click Next.
6
Click CD-ROM drive, then click Next. Make sure Specify a location
is not checked.
7
At the next screen, click Next. Installation proceeds automatically.
8
When installation halts, click Finish.
9
Read the agreement and click Agree. Continue with the instructions in
"Finishing Windows
Finishing Windows Installation
1
Make sure you have paper loaded in the printer. Then click Print a
Test Page to check that your printer is set up correctly.
2
Click Install Epson Software
Film Factory. If you want the
program, click Install.
If you see a message about
installing QuickTime
and follow the instructions on
the screen. You don't need a
registration number.
3
Click Install Printer User's Guide.
4
Click Add Epson Photo Website Links and follow the instructions on
the screen. The click Back to return to the Options menu.
5
Click Install Epson Web-To-Page and follow the instructions on
the screen.
6
When you're finished, click Exit to close the Options Menu.
7
When you see the Epson Product Registration screen, register your
printer as instructed, then remove the Epson CD.
You're ready to print! See your Quick Guide for details.
Installation" .
, click Yes ®
SCREEN.