Installing The Ink Cartridges - Epson Stylus C80WN Setup And Installation Manual

Installing the Ink Cartridges

Follow these steps to plug in the printer, turn it on, and install the ink cartridges:
1. Plug the printer's power cord into the AC
inlet on the back of the printer. Then
plug the other end into a grounded
electrical outlet.
2. Press the P power button to turn on the
printer.
The green P power light flashes and the
ink cartridge holders begin to move.
3. Lower the printer's output tray and open
the cover.
4. Shake each cartridge four or five times. Then unwrap the
cartridges.
10
Setting Up Your Printer
Always use the P power
button to turn the printer on or
off. Never use an external
switch, such as a power strip
switch or wall switch.
Keep ink cartridges out of the
reach of children. If ink gets on
your skin, wash the area
thoroughly with soap and
water. If ink gets in your eyes,
flush them immediately with
water.
Don't remove the cartridge labels, or ink may
leak.
power
light
power
button