PEUGEOT BOXER 2018 Handbook page 150

In the event of a breakdown
F Identify the failed bulb then open the rear
doors.
F Remove the corresponding access cover by
removing the seven fixing screws (van).
or
Remove the corresponding access cover by
pulling its handle to unclip it (combi).
F Disconnect the electrical connector by
pressing on its central tongue.
F Remove the two fixing nuts of the lens unit.
F Pull the lens unit from the outside.
148
F Remove the six bulb holder fixing screws.
F Spread the three retaining tongues and
remove the bulb holder from its housing.
F Change the bulb.
F Carry out these operations in reverse
order to put each bulb in place.
Licence plate lamps
Type C, C5W – 5W
F Press the point indicated by the arrow, then
remove the plastic lens.
F Remove the failed bulb by moving aside the
two contacts.
F With the new bulb in place, ensure that it is
secured correctly between the two contacts.
F Replace the plastic lens and press on it to
lock it in place.