PEUGEOT BOXER 2018 Handbook page 142

In the event of a breakdown
Take care to place the jack only at jacking
point 1 or 2 under the vehicle, making sure
that the jack head is centred at the contact
point on the vehicle. Otherwise, there is
a risk of damage to the vehicle and/or the
jack collapsing.
Make sure that any passengers are safe
(removed, away from the vehicle).
Never put your hands or your head in the
wheel arch.
Never go underneath a vehicle raised
using a jack (use an axle stand).
Do not use:
- The jack for any other purpose than
lifting the vehicle.
- A jack other than the one supplied by
the manufacturer.
140
The jack should only be used to change
a wheel with a damaged or punctured tyre.
The jack does not require any maintenance.
The jack meets European standards, as
defined in the Machinery Directive 2006/42/EC.
Certain parts of the jack such as the screw
thread or the joints could cause injury:
avoid touching them.
Carefully remove all traces of lubrication
grease.
At the front
F Position the jack C at location 1 provided on
the underbody, near the front wheel.
At the rear
The jack must be located about 60 cm
from the edge of the rear wheel.
F Position the jack C at location 2 in the hole
provided for this purpose.