Changing The Printer Port Setting - Epson Stylus C80N Setup And Installation Manual

Changing the Printer Port Setting

Follow the steps below to change the printer port setting in Windows.
1. In Windows 95, 98, NT 4.0, Me, and 2000, click
then click
Printers
In Windows XP, click
, and then click
Hardware
2. Right-click the
3. In Windows 95, 98, and Me, click the
In Windows NT 4.0, 2000, and XP, click the
4. In Windows 95, 98, and Me, click
In Windows NT 4.0, 2000, and XP, if the port you want is already defined in the
list, select it, click
.
Port
5. In Windows 95, 98, and Me, click
network. The name of the print server will vary depending on the network
protocol used. Select the print server, click
Port dialog box. Click
In Windows NT 4.0, 2000, and XP, select the type of port to add, then click
. What you do next depends on the type of port you are adding. Do what is
Port
required, close the Printer Ports dialog box, and then click
See the status sheet you printed out earlier (see page 13) for information
you might need such as the NetBIOS name, the IP address, the name of
the NetWare print queue, and so on.
If you need to change the print server's configuration, use the WinAssist
program (see page 16).
For more information, see the Administrator's Manual.
6. Restart the computer.
.
, click
Start Control Panel
Printers and Faxes
EPSON Stylus C80 Series
, and then go to step 6. If the port is not defined, click
OK
, and then click
Apply
Start
, click
.
printer icon, then click
tab.
Details
tab.
Ports
.
Add Port
, then find the print server on the
Browse
, then click
OK
.
OK
Installing the Printer Driver on Workstations
, point to
Settings
Printers & Other
Properties
to close the Add
OK
.
OK
, and
.
Add
New
25