Omt; Local Connections To Omt; Connection From Pc To Omt - Comba Telecom RA-5J00 User Manual

USER MANUAL FOR RA-5J00

5 OMT

The equipment can be monitored and controlled by OMT software running on a local PC with local
commissioning cable.

OMT software running on a local PC with serial connection to the equipment.
This chapter is to introduce how to apply local connection to OMT for the first installation, for the detailed
OMT information, please refer to OMT user manual and other references.
5.1

LOCAL CONNECTIONS TO OMT

After installing OMT software on the PC, connection to the equipment can be done locally.
Double click the OMT explorer icon, the OMT Explorer main screen window will appear.

5.1.1 CONNECTION FROM PC TO OMT

Before accessing to the OMT, physical connection between the OMT software and the equipment must be
made. A straight-through RJ45 cable shall be applied for the connection.
In order to access to equipment by IP protocol, the PC must be set with proper IP address and subnet
mask.
Figure 42: PC Protocol Setting
ENU STATUS : 1-0-0 Copyright - refer to title page Page 40