Hyundai Tucson 2020 Owner's Manual page 606

Maintenance
8. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
9. Reinstall the lamp assembly to the
body of the vehicle.
Stop/Tail lamp, Tail lamp
(Type B, LED)
If the LED lamp does not operate, we
recommend that you have the vehi-
cle checked by an authorised
HYUNDAI dealer.
7-90
Inside lamp
Tail lamp, Reversing lamp, Rear
fog lamp
1. Turn off the engine.
2. Open the tailgate.
3. Remove the service cover using a
flat-blade screwdriver.
R R e e a a r r f f o o g g l l a a
R R e e a a r r f f o o g g l l a a
R R e e v v e e r r s s
R R e e v v e e r r s s
4. Remove the socket from the
OTLE075016
assembly by turning the socket
anticlockwise until the tabs on the
socket align with the slots on the
assembly.
5. Pull the bulb out of the socket.
6. Insert a new bulb into the socket.
7. Install the socket into the assem-
bly by aligning the tabs on the
socket with the slots on the
assembly and turning the socket
clockwise.
8. Reinstall the lamp assembly to the
body of the vehicle.
m m p p
m m p p
Tail lamp
i i n n g g l l a a m m p p
i i n n g g l l a a m m p p
OTL075039