Panasonic KX-TGW420 Operating Instructions Manual page 29

time. You can then hang up without being charged
for the call.
1
MMenuN
2
MbN: "Answering System" a MSelectN
3
MbN: "Answer Delay" a MSelectN
4
MbN: Select the desired setting. a MSelectN
5
Press MBackN or MHomeN repeatedly to return
to standby mode.
Caller's recording time
You can change the maximum message recording
time allowed for each caller. You can select "1
Minute", "2 Minutes", or "5 Minutes". The
default setting is "1 Minute".
1
MMenuN
2
MbN: "Answering System" a MSelectN
3
MbN: "Message Length" a MSelectN
4
MbN: Select the desired setting. a MSelectN
5
Press MBackN or MHomeN repeatedly to return
to standby mode.
Message interrupt
This feature allows you to answer the call by
another unit while the caller is leaving a message
in your mailbox. The default setting is "On".
1
MMenuN
2
MbN: "Answering System" a MSelectN
3
MbN: "Message Interrupt" a MSelectN
4
MbN: Select the desired setting. a MSelectN
5
Press MBackN or MHomeN repeatedly to return
to standby mode.
For assistance, please visit http://shop.panasonic.com/support
TGW420_(en)_OI_1226_ver06.pdf 29
Answering System
29
2019/12/26 13:15:33