Advertisement
If you want to use and select a DCS code, instead of a CTCSS tone, follow these steps:
1.
Press the MENU button;
2.
Turn the Encoder knob till: "C-CDC"(in TX and RX); "R-CDC"(only in RX) or
"T-CDC" (only in TX) appears on the display;
3.
Push ENT to enter the function;
4.
Press the Function key 1;
5.
Turn the Encoder knob and select the desired DCS code;
6.
Confirm the selection by pressing the ENT button.
The setting of a DCS code disables all CTCSS tones, because these functions cannot be
used simultaneously.
Name - Nome
It is possible to choose and set a name that will appear on the display instead of the
channel number.
14 |
Midland G18 PRO instruction guide
Technical specifications
GENERAL
Frequency range
446.00625- 446.19375 MHz (PMR446)
Channels
16+83 pre-set
Working temperature
-20°+55°
Operating voltage
7.4V
Operative Mode
Simplex
Dimensions
113mm×56mm×38mm (Antenna excluded)
Weight
240g (Battery included)
Impedance
Antenna 50Ω
Duty cycle
5/5/90%
TRANSMITTER
Frequency stability
±2.5PPM
Output power
≤500mW ERP
Max frequency deviation
≤2,5KHz
Audio distortion
≤3%
Adjacent channel power
< 60 dB
Spurious radiation
Within European legal terms
Occupied bandwidth
Within European legal terms
RECEIVER
RF sensitivity
<0.2UV@20 dB SINAD
Audio distortion
≤3%
Audio response
300Hz ÷ 3KHz
Adjacent channel selectivity
Within European legal terms
Intermodulation rejection
Within European legal terms
Spurious emissions
Within European legal terms
Blocking
Within European legal terms
SAR
0,982W/Kg
WARNING: Direct plug-in ac/dc power supply must be used for disconnecting the tran-
sceiver from the mains; the desktop charger must be positioned close to the unit and
easily accessible.
Midland G18 PRO instruction guide
| 15
Advertisement
