Rapid video mounts RVM-64FM125 Instruction Manual page 7

STEP 3 - PRIOR TO EXTENDING ARMS REMOVE ARM ASSEMBLY FROM WALL PLATE
Prior to extending arms;
Remove 2 Philips screws at top of
Arm Assembly .
Remove additional 2 Philips
screws at bottom of Arm Assembly.
Note- 4 Philips screws will be used in Step
5 to reattach arm assembly to wall mount.
Remove Arm Assembly by gently
lifting vertically off Wall Plate
Plate is now ready to attach to wall surface
(Step 4).
. Wall
P 7