Epson LQ-680Pro User Manual page 3

Electronic
Interfaces One standard bidirectional 8-bit parallel
interface with IEEE 1284 nibble mode
support and one optional interface slot
Buffer 64KB
Built-in fonts Bitmap fonts
EPSON Draft 10, 12, 15 cpi
EPSON Roman 10, 12, 15 cpi,
proportional
EPSON Sans Serif 10, 12, 15 cpi,
proportional
EPSON Courier 10, 12, 15 cpi
EPSON Prestige 10, 12 cpi
EPSON Script 10 cpi
EPSON OCR-B 10 cpi
EPSON Orator 10 cpi
EPSON Orator-S 10 cpi
EPSON Script C proportional
Scalable fonts
EPSON Roman 10.5, 8 to 32 pt
(every 2 pt)
EPSON Sans Serif 10.5, 8 to 32 pt
(every 2 pt)
EPSON Roman T 10.5, 8 to 32 pt
(every 2 pt)
EPSON Sans Serif H 10.5, 8 to 32 pt
(every 2 pt)
Barcode fonts
EAN-13, EAN-8, Interleaved 2 of 5,
UPC-A, UPC-E, Code 39, Code 128,
POSTNET
Character tables One Italic and 12 graphical character
tables (35 graphical character tables are
available in some countries)
Character sets 14 international character sets and one
legal character set
Electrical
120 V
Input voltage range 99 to 132 V
Rated frequency range
Input frequency range
Rated current 1.0 A (maximum
2.5 A depending on
the character type)
Power consumption Approx. 42 W (ISO/IEC 10561 letter pattern)
220 to 240 V
198 to 264 V
50 to 60 Hz
49.5 to 60.5 Hz
0.5 A (maximum
1.4 A depending on
the character type)
11/00
Environmental
Temperature
Operation 41 to 95 °F (5 to 35 °C)
Storage –22 to 140 °F (–30 to 60 °C)
Paper
Use recycled paper and envelopes only under normal
temperature and humidity conditions, as follows:
Temperature
Humidity
Do not load paper that has been folded or is damaged,
wrinkled, or curled.
Ordinary single sheets:
front and cut-sheet feeder entry
Width Front
3.5 to 12 inches (90 to 304.8 mm)
Cut-sheet feeders
3.9 to 11.6 inches (100 to 297 mm)
Length Front
2.8 to 16.5 inches (70 to 420 mm)
High-capacity cut-sheet feeder
2.8 to 16.5 inches (70 to 420 mm)
Second bin cut-sheet feeder
8.2 to 16.5 inches (210 to 420 mm)
Thickness Front
0.0025 to 0.0074 inch (0.065 to 0.19 mm)
Cut-sheet feeders
0.0025 to 0.0047 inch (0.065 to 0.12 mm)
Weight Front
14 to 42 lb (52 to 157 g/m
Cut-sheet feeders
14 to 24 lb (52 to 91 g/m
EPSON LQ-680Pro
Humidity
(without condensation)
10 to 80% RH
0 to 85% RH
59 to 77 °F (15 to 25 °C)
30 to 60% RH
2 )
2 )
EPSON LQ-680Pro 3
-