Inspections And Maintenance By Dealer - Stihl FS 260 Instruction Manual

25 Inspections and Maintenance by Dealer

25 Inspections and Mainte‐
nance by Dealer
25.1 Maintenance Work
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
ized STIHL servicing dealer.
25.2 Fuel Pickup Body in Tank
► Check the pickup body in the fuel tank every
year and have it replaced if necessary.
The pickup body should be positioned in the
area of the tank shown in the illustration.
25.3 Anti-vibration elements
FS 260
A vibration-absorbing rubber element is installed
between the powerhead and the drive tube.
Have it checked if there are signs of wear or a
noticeable increase in vibration levels.
0458-743-0121-E
FS 360
Four anti-vibration elements (arrows) are instal‐
led between the powerhead and the drive tube.
Have the system checked if there is a noticeable
increase in vibrations.
Both vibration gaps (arrows) are preset to the
same width at the factory. If the size of the two
vibration gaps varies greatly and/or one of them
closes up, have your servicing dealer repair the
anti-vibration system.
25.4 Wear guard on FS 360 anti-
vibration housing
There is an easily replaced wear guard on the
side of the anti-vibration housing. The guard may
wear as a result of rubbing against the side plate
of the harness during operation and should be
replaced if necessary.
English
39