Switching to sing/e sheets
To switch from continuous paper to single sheets, follow these
steps:
1.
If any printed sheets remain in the printer, press the
Tear Off/Bin
position.
2. Tear off the printed pages.
Caution:
Always tear off paper before back-feeding paper through
the printer; back-feeding too many sheets can cause a
paper jam.
Never back-feed labels. Labels can easily come off their
backing and jam the printer.
Press the
3.
paper backward to the standby position. The paper is still
attached to the push tractor but is no longer in the paper path.
4. Move the paper release lever to the single-sheet position.
5.
Adjust the edge guides to match the width of your paper.
You can now load single sheets as described in "Using Single
Sheets" on page 2-4.
button to advance the paper to the tear-off
Load/Eject
button. The printer feeds the continuous
Paper Handling
2-31