6. Insert a sheet of paper between the edge guides until it meets
resistance. Make sure you adjust the edge guides to match the
width of your paper. After a few seconds, the printer feeds the
paper to the loading position and begins printing the self test.
Note:
Always close the printer cover before printing. The printer
printing when the cover is open.
If you want to temporarily stop printing the self test, press the
Pause
button. To resume printing, press
To end the self test, first press the
7.
remains in the printer, press the
the page; then turn off the printer. Here is part of a typical self
test:
Pause
again.
Pause
button. If paper
Load/Eject
button to eject
Setting Up the Printer
stops
Z-13