Epson LQ-2070 User Manual page 97

4. Pull the paper-set levers all the way forward until the paper
guides retract and lock open to allow for paper loading.
5. Fan a stack of paper (up to 150 sheets); then tap the side and
bottom of the stack on a flat surface to even it up.
Caution:
Do
not use
6. Insert the paper along the left paper guide. The printable side of
the paper should face the back of the printer.
7. Adjust the position of the right paper guide so that it matches
your paper's width. Make sure the position of the guide allows
the paper to move up and down freely. Lock the guide into
place.
8. Push back the paper-set levers to clamp the paper against the
guide rollers.
labels in the
cut-sheetfeeder.
Using Printer Options
4-5