Advertisement
Quick Links
Fountain Components
Image
Item Description
Navonna
Fountain - Disc
Navonna
Fountain - Urn
Navonna
Fountain -
Pedestal
Navonna
Fountain -
Pump House
Navonna
Fountain -
Pump Door
Navonna
Fountain - Basin
Fountain Information:
• Three people are recommended for the installation of this fountain!
• This fountain holds approximately 37-40 gallons of water.
• This fountain uses a medium fountain cover but does not cover the basin:
• Compatible with #10 Refill Device and LED kits
• A special stopper is required to use the refill kit for this fountain
Pump Information:
OEMPF525 - 525 GPH Pump (16 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Component
Quantity
Item #
FT-197A
1
FT-197B
1
FT-197C
1
FT-197D
1
FT-197E
1
FT-197F
1
FT-197 Navonna Fountain
Assembly Instructions
FTNCOV-MED
Pump Kit Parts List
Image
Approx. 24" length of 1/2" black non-
Approx. 2" length of 5/8" clear vinyl
Approx. 2" length of 1/2" CPVC pipe
Approx. 12" length of 1/2" black
Approx. 2" length of 5/8" clear vinyl
Approx. 2" length of 1/2" CPVC pipe
MADE IN USA
Component
PK500 Pump
(use adapter indicated)
#10 Stopper
kink tubing
tubing
non-kink tubing
tubing
Wedges
#7 Drain Stopper
Hose Clamps
Proudly
Quantity
1
1
1
1
1
1
2
1
3
1
1
rev 4/6/2020
Advertisement
Related Manuals for Campania International Navonna FT-197
Summary of Contents for Campania International Navonna FT-197
- Page 1 FT-197 Navonna Fountain Assembly Instructions Fountain Information: • Three people are recommended for the installation of this fountain! • This fountain holds approximately 37-40 gallons of water. • This fountain uses a medium fountain cover but does not cover the basin: FTNCOV-MED •...
- Page 2 FT-197 Navonna Fountain Assembly Instructions Three people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
- Page 3 FT-197 Navonna Fountain Assembly Instructions BOTTOM OF URN (FT-197B) Step 7 - Position the urn (FT-197B) over the pedestal (FT-197C). Step 8 - Insert the CPVC pipe already connected to the pump into the CPVC coupling in the bottom of the urn (FT-197B). Step 9 - Center the urn (FT-197B) on the pedestal (FT-197C).
- Page 4 Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.