Vertical Motion - Epson LQ-1050 User Manual

Vertical Motion

Form feeding
FF
Format:
ASCII code:
Decimal:
Hexadecimal: OC
Comments:
Prints the data in the print buffer and advances the paper to the
top of the next form according to the current page length. The
default page length is 66 lines; you can change the page length
with ESC C. When using a cut sheet feeder, FF ejects the sheet
into the stacker but does not load a new sheet.
ESC C
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Sets the page length to n lines in the current line spacing. The
value of n must be from 1 to 127 lines. The top of form position is
reset to the current line.
Overrides the DIP switch page length setting.
FF
12
ESC C
27 67
1B 43
Commands Arranged by Topic
Set Page Length in Lines
n
n
n
Command Summary
Form Feed
9-13