6. Push the paper set levers back until they clamp the paper
against the guide rollers. The levers will not close completely if
too much paper is used. If this happens, remove some paper
from the stack and try again.
7. If you use the double-bin cut sheet feeder, you can select the
paper bin number with the control panel on the printer. When
the printer is on line, press the LOAD/EJECT button to change
between bin 1 and bin 2. The printer beeps once if you select
bin 1 and twice for bin 2. (You can also select the bin with the
ESC EM software command.>
LOAD / EJECT
Using the Printer Options
5-11