Switching Off The Water Softening System; Rinse Aid System; Rinse Aid - Bosch SMS6ECW38M User Manual

Note: Only use special salt for
3.
dishwashers.
Do not use salt tablets.
Do not use table salt.
Add the special salt to the dis-
penser.
1
Funnel
Fill the dispenser right up with spe-
cial salt. The water in the dis-
penser is displaced and forced
out.
Place the lid back on the dis-
4.
penser and turn to close.
Switching off the water
softening system
If you find the special salt refill indic-
ator irritating, e.g. when using com-
bined detergents with salt replace-
ment substances, you can switch the
salt refill indicator off.
Note
To avoid damage to the appliance, only
switch off the water softening system in
the following cases:
¡ The water hardness is max. 26 °E
and you are using combined deter-
gents with salt replacement sub-
stances. According to manufactur-
ers, combined detergents with salt
replacement substances can gen-
1
Depending on the appliance specifications
¡ The water hardness is 0 - 8 °E.
1.
2.
a
a The display shows H:xx.
a The display shows
3.
4.
a The water softening system is

Rinse aid system

Rinse aid system
You can use the rinse aid system
Rinse aid system
and rinse aid to get tableware and
glasses rinsed perfectly without
marks.

Rinse aid

For optimum drying results, use rinse
aid.
Only use rinse aid for domestic dish-
washers.
Adding rinse aid
If the rinse aid refill indicator lights
up, top up with rinse aid. Only use
rinse aid for domestic dishwashers.
erally only be used up to a water
hardness of 26 °E without adding
special salt.
You do not need to use special
salt.
Press ⁠ .
To open the basic settings, press
for 3 seconds.
Press or repeatedly until the
display shows H:00.
To save the settings, press
for 3 seconds.
switched off and the salt refill indic-
ator is deactivated.
Rinse aid system en
⁠ .
29