Table of Contents
Advertisement
INSTALLATION AND OPERATION MANUAL,
GAS CABINET BASE CONVECTION STEAMER, GCX-16, GCX-24
10.0 TROUBLESHOOTING (Continued)
PILOT LIGHT DOES NOT IGNITE (ELECTRONIC IGNITION)
1. Gas control knob is in "OFF" position.
2. Loose or dirty wire connection to ignition module, clean/or tighten.
3. Ignition cable shorting out. Check that it is not in contact with metal or damaged.
4. Defective ignition module.
5. Unit is 100% lock out. Turn off and try in five minutes.
6. Dirty flame sensor. Clean with emery cloth.
7. Pilot burner/ignitor sensor, cracked ceramic insulator. Have replaced.
8. Check for too much draft in room.
MANUAL 10064R2
28
2020-07-13
Advertisement
Table of Contents
