Preparation/Mounting - Dual XDCPA10BT Installation & Owner's Manual

XDCPA10BT INSTALLATION
Preparation
Before You Start
• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it
would be subject to dust, dirt or excessive vibration.
M5.0
x
6.0mm M5.0
x
5.0mm
TRIM RING
MOUNTING SCREWS
* Use 2 or 3 screws to affix the monitor to the bracket.
5