Vanco Evolution EVRX2006 Manual page 3

FEATURES
The Evolution by Vanco EVRX2006 HDMI Receiver over Single Cat5e/6 with Bi-directional IR, auto EDID/EQ, and PoE
receives high definition video and audio signals, IR, and power at a distance of up to 164ft/50m over a single Cat5e/6
cable. Power over Ethernet (PoE) Technology transmits power over Cat5e/6, allowing the Receiver to be powered without
the use of a power supply. No EDID or EQ adjustments are necessary as the unit automatically adjusts for compatibility
and gain. This receiver also features a newly redesigned slim and compact chassis for easy and flexible installations. This
product fully supports DTS-HD and Dolby TrueHD audio formats, and is HDCP compliant. In addition, bi-directional IR
pass-through allows for source or display control. The EVRX2006 works with Evolution Series Splitters, Matrix Selector
Switches and Extender Transmitters over Cat5e/Cat6 that have POE functionality
Ultra Slim HDMI® POE Receiver over Single Cat5e/Cat6 Cable
Part # EVRX2006
•
To be utilized with Evolution by Vanco matrix units, splitters, and extender transmitters that send HDMI
signals over a single Cat5e/6 cable and feature Power over Ethernet (PoE) Technology
•
Allows HDMI audio/video signals to be transmitted using a single Cat5e or Cat6 Cable
•
Features Power over Ethernet (PoE) Technology which transmits power over Cat5e/Cat6; No power
supply needed on the receiver end
•
Slim and compact design
•
Wide band Bi-directional IR system allowing for control of source or display (IR accessories included)
•
Wideband IR signal from 20KHz to 60KHz
•
Transmission Range: Extends HDMI transmission up to 50m (164ft) from the HDMI source at Full HD
1080p 24-bit color and 3D
•
Features Auto EDID and EQ Management
•
Works with HDMI and HDCP compliant devices
•
HDCP 2.0 compliant
•
Pure uncompressed 7.1ch digital audio
•
Supports DTS-HD and Dolby TrueHD high bit rate audio
•
Dimensions: 2.7" (68.58mm) W x .7" (17.78mm) H x 3.25" (82.55mm) D
INTRODUCTION
800.626.6445 3