Troubleshooting - MBM EFTA477L Operating Instructions Manual

Frytop
Hide thumbs Also See for EFTA477L:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 20
4.
Routine maintenance

Troubleshooting

Whenever the appliance does not work properly, try to solve the less serious problems using
this table.
FAULT
The appliance does not turn on.
Water does not reach the pasta
cooker tank.
Water does not drain from the
cooking compartment.
The inner walls of the tank are
covered with limestone.
The cooking compartment is
stained.
The gas appliance does not turn
on.
The light indicators do not turn
on.
If the problem cannot be resolved, turn the appliance off and shut all the supply valves. Then
contact customer service.
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
POSSIBLE CAUSE
The master switch is not
connected.
The residual current device
or circuit breaker has tripped.
The waterworks gate valve
is shut.
The drain is clogged.
The water is too hard; the
softener is finished.
Quality of the water.
Ineffective detergent.
Insufficient rinsing.
Gas valve shut.
Air inside pipes.
The master switch is not
connected.
The residual current device
or circuit breaker has tripped.
- 15 -
15
INTERVENTION
Connect the master switch.
Restore the residual current
device or circuit breaker.
Open the waterworks gate
valve.
Clean the drain filter.
Free the drain from residues.
Connect the appliance to a
water softener.
Regenerate the water
softener.
Descale the cooking
compartment.
Filter the water (see water
softener).
Use the recommended
detergent.
Rinse once again.
Open the gas valve.
Repeat the ignition operations.
Connect the master switch.
Restore the residual current
device or circuit breaker.

Advertisement

Table of Contents
loading

Table of Contents