Mitsubishi Electric Mr.Slim MSY-GR09VF Operating Instructions Manual page 10

Hide thumbs Also See for Mr.Slim MSY-GR09VF:
Table of Contents

Advertisement

Available languages

Available languages

● OPERATING INSTRUCTIONS ●
C
LEANING
Instructions:
• Switch off the power supply or turn off the breaker before cleaning.
• Be careful not to touch the metal parts with your hands.
• Do not use benzine, thinner, polishing powder, or insecticide.
• Use only diluted mild detergents.
• Do not expose parts to direct sunlight, heat, or fi re to dry.
Front panel
Hinge
Hole
1. Lift the front panel until a "click" is heard.
2. Hold the hinges and pull to remove as shown in
the illustration above.
• Wipe with a soft dry cloth or rinse it with water.
• Do not soak it in water for more than two
hours.
• Dry it well in shade.
3. Install the front panel by following the removal
procedure in reverse. Close the front panel
securely and press the positions indicated by
the arrows.
<GR09/13/15>
Air cleaning fi lter
(Electrostatic anti-allergy enzyme fi lter, option)
Back side of air fi lter
Every 3 months:
• Remove dirt by a vacuum cleaner.
• Put it back to its original position, and install all tabs of the air cleaning fi lter.
When dirt cannot be removed by vacuum cleaning:
• Soak the fi lter and its frame in lukewarm water before rinsing it.
• After washing, dry it well in shade. Install all tabs of the air fi lter.
Every year:
• Replace it with a new air cleaning fi lter for best performance.
• Parts Number
GR09/13/15:
MAC-2320FT
(with frame)
MAC-2321FT
(no frame)
GR18/24/30:
MAC-2310FT-E
(with frame)
MAC-2410FT-E
(no frame)
<GR09/13/15>
Air fi lter
Pull to remove
from the air fi lter.
Attach to the air fi lter.
En-9
<GR09/13/15>
<GR18/24/30>
<GR18/24/30>
Push to install
into the unit
along the fi lter
Filter guide
guide.
Pull to remove from the unit.
• Do not use water hotter than 50°C.
• Do not use a scrubbing brush, a hard sponge, or the like.
• Do not soak or rinse the horizontal vane.
• Do not apply excessive force on the fan as it may cause cracks or breakage.
Air fi lter (Nano platinum fi lter)
Clean every 2 weeks
• Remove dirt by a vacuum cleaner, or rinse with water.
• After washing with water, dry it well in shade.
What is "Nano platinum fi lter" ?
Nano platinum is a ceramic particle that includes a platinum nanoparticle.
The particles are incorporated into the fi lter material, which results in pro-
viding semi-permanent antibacterial and deodorizing characteristics for the
fi lter. Nano platinum surpasses the catechin (a biofl avonoid that is found
in green tea) in performance. Nano platinum fi lter uses this compound not
only to improve air quality but also to eliminate bacteria and viruses. This air
fi lter has a semi-permanent lasting effect even after washing it with water.
<GR18/24/30>
Air cleaning fi lter
(Microparticle catching fi lter)
Removes the microparticles from the air by means
of static electricity.
Back side of air fi lter
Every 3 months:
• Remove dirt by a vacuum cleaner.
• Do not wash it with water. Replace it with a new air cleaning fi lter when tobacco
tar or oil stains adhere to it.
• Put it back to its original position, and install all tabs of the air cleaning fi lter.
Every 3 year:
• Replace it with a new air cleaning fi lter for best performance.
• Parts Number
GR09/13/15:
MAC-EMF515FT-E
MAC-EMF525FT-E
GR18/24/30:
MAC-EMF615FT-E
MAC-EMF625FT-E
Important
• Clean the fi lters regularly for best performance and to re-
duce power consumption.
• Dirty fi lters cause condensation in the air conditioner which
will contribute to the growth of fungi such as mold. It is
therefore recommended to clean air fi lters every 2 weeks.
(with frame)
(no frame)
(with frame)
(no frame)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents