Table of Contents
Advertisement
HOW TO INSTALL THE WHEELS
If the wheels must be removed for service, make sure they are
installed as follows.
Front Wheel
1.
Make sure the valve stem is to the outside of the tractor. Slide
the front wheel on the spindle (See Figure 35).
2.
Fasten the front wheel with washer and cotter pin. Bend the
ends of the cotter pin apart to keep the front wheel on the
spindle.
3.
If your model has hub caps, install the hub caps. Make sure
the washer hold the hub caps in place.
Rear Wheel
1.
Install the washers and spacer onto the axle as shown in
Figure 36.
2.
Mount the square key in the key slot (See Figure 36).
3.
Make sure the valve stem is to the outside of the tractor. Align
the slot in the rear wheel with the square key. Slide the rear
wheel on the axle.
4.
Fasten the rear wheel with washer and e−ring.
5.
If your model has hub caps, install the hub caps. Make sure
the washer hold the hub caps in place.
1740336SM
MAINTENANCE
Hub Cap
Valve Stem
Hub Cap
E−Ring
34
Cotter Pin
Washer
Washer
Rear Wheel
Washer
Valve Stem
Spindle
Front Wheel
Figure 35
Square Key
Key Slot
Washer
Axle
Spacer
Figure 36
Advertisement
Table of Contents
