Advertisement
17. Keep clear of the workpiece near the area being
fastened. Fasteners may bend sideways during
driving, causing them to exit the workpiece at
an unexpected point, causing personal injury.
18. Transport tool safely. Always disconnect air
supply when moving the tool. Carry the tool by
the handle and avoid contact with the Trigger.
19. Hold tool away from head and body.
During operation the tool may
kick back causing injury.
20. Do not drive fasteners into a workpiece
that has people, utility lines, or other
objects behind or inside it.
21. Keep balance while using this tool.
Keep area below clear if working in an elevated
location, and secure air hose to prevent falls
from bystanders accidentally pulling on it.
Lithium Battery Safety Warnings
LitHiUM BAttERiES StORE
A LARGE AMOUnt OF EnERGy AnD
WiLL VEnt ActUAtE OR EXpLODE
iF MiStREAtED:
1. Keep Battery pack dry.
2. DO nOt DO Any OF tHE FOLLOWinG
tO tHE BAttERy pAcK:
a. Open,
b. Drop,
c. Short-circuit,
d. puncture,
e. incinerate, or
f. Expose to temperatures greater than 265°F.
Page 6
SAVE tHESE inStRUctiOnS.
For technical questions, please call 1-888-866-5797.
22. Obey the manual for the air compressor
used to power this tool.
23. Install an in-line shutoff valve to allow
immediate control over the air supply in an
emergency, even if a hose is ruptured.
24. Do not engrave or stamp anything into
the housing to avoid weakening it.
25. The warnings and precautions discussed in this
manual cannot cover all possible conditions and
situations that may occur. It must be understood
by the operator that common sense and caution
are factors which cannot be built into this
product, but must be supplied by the operator.
3. Charge Battery Pack only according
to its Charger's instructions.
4. Inspect Battery Pack before every use;
do not use or charge if damaged.
Item 57180
Hide quick links:
Advertisement
