Advertisement
General Operating instructions
1. Make sure that the Trigger is in the
off-position, then attach a fully charged
Battery Pack making sure it clicks in place.
2. Before each use, test the tool as
directed in the prior section.
WARninG! tO pREVEnt
SERiOUS inJURy: Keep second hand
away from tool discharge area,
especially if holding workpiece.
tool applies extreme force to fastener,
and fasteners may deflect or discharge
in an unexpected direction.
WARninG! tO pREVEnt inJURy:
Do not hold tool near body while driving.
tool recoil can cause injury.
WARninG! tO pREVEnt SERiOUS
inJURy, incLUDinG pERMAnEnt
HEARinG LOSS: Always wear hearing
protection when using the tool.
3. Position tool at desired fastener location, set
the Activation Mode Switch, and depress the
Workpiece Contact fully against the workpiece.
Squeeze the Trigger to discharge a fastener.
4. to change driving depth: Disconnect Battery
pack and keep Workpiece contact pointed
away.
To reduce nail depth, turn the Depth Knob
clockwise, toward .
To increase nail depth, turn the Depth
Knob counterclockwise, toward .
Depth
Knob
Page 12
For technical questions, please call 1-888-866-5797.
5. the LED indicator:
LED indicator
a. Flashing red indicates a jam in the
Magazine. Stop and clear the jam.
b. Solid red indicates low battery. Remove
Battery Pack and recharge it.
c. Flashing green indicates the tool is over
heating. Stop using the tool immediately and
allow it to cool down before continuing use.
d. Solid green indicates no fasteners are in
the Magazine. Stop and reload tool.
e. If the LED is not illuminated this indicates
the battery is fully charged and the
fasteners are correctly installed.
6. After use, to prevent accidents:
a. Release the trigger.
b. Remove the Battery pack.
c. Empty the Magazine.
d. Attempt to discharge the tool into a piece of
scrap wood to ensure that it is disconnected
and is incapable of driving any fasteners.
e. Release the trigger again.
f. clean external surfaces with clean, dry cloth.
7. Store indoors out of children's reach.
Item 57180
Hide quick links:
Advertisement
