Epson AcuLaser C8500 Setup Manual page 52

c
Caution:
Before you install the interface card, be sure to discharge any
static electricity by touching a grounded piece of metal.
Otherwise, you may damage static-sensitive components.
1. Make sure the printer is not turned on, and unplug the power
cord if it is plugged into an electrical outlet.
2. Be sure to set any switches and jumpers on the card, as
necessary. See the interface card's manual for details.
3. Remove the screws that secure the interface slot cover on the
back of the printer and remove the cover.
Note:
Keep the slot cover in a safe place. You will need to reattach it if you
remove the interface card later.
46
Installing the Options