Installing An Interface Card - Epson AcuLaser C8500 Setup Manual

8. Secure the right cover with the screws, then close the front
cover and push the paper path unit back into the printer.
9. Plug the printer's power cord into an electrical outlet.
10. Turn on the printer.
To confirm that the ROM module is installed correctly, print a
status sheet. If the module is not listed on the status sheet, try
reinstalling the module. Make sure that it is securely fastened to
the ROM slot on the circuit board. For instructions on how to print
a status sheet, see "Printing a status sheet" on page 50.

Installing an Interface Card

Your printer comes with a Type B interface slot. Various optional
interface cards are available to expand your printer's interface
options.
Note:
Mac OS 8.5.1 or later support the Type B IEEE 1394 Interface Card
(C82372 ). It can be connected to a Macintosh® FireWire® port.
Follow these steps to install an optional interface card:
45
Installing the Options