Abus HDCC72550 User Manual page 31

to the three metric screws from the back.
6. Insert the ceiling recessing ring into the
feed-through and the three spreading
clamps into the fixing holes and push the
spreading clamps through the fixing holes.
The spreading clamps should now hold the
ceiling recessing ring to the ceiling.
7. Next fasten the three fixing screws until the
ceiling recessing ring is finally level and
firmly attached to the ceiling.
8. The camera module can then be installed
and oriented in the same way as during the
installation in the installation adapter, and
the dome can be placed on top.
The appropriate TVAC31360 recessing ring
is required for the installation. This is not included
in the scope of delivery of the camera.
The required installation depth is min. 5 cm.
31
English