Table of Contents
Advertisement
Description
Specifications
Temperature Range
1
Temperature Stability
1,2
Cooling Capacity
Reservoir Volume
Gallons
Liters
Unit Dimensions
(H x W x D)
Inches
Centimeters
Section II General Information
The System I Liquid to Liquid Heat Exchanger uses building recirculating or
tap water as the secondary cooling medium to remove heat from the cooling
fluid in the closed recirculation loop.
The unit consists of a heat exchanger, recirculation pump, PVC reservoir,
and an analog temperature controller.
18
16
14
12
10
8
6
4
2
2
3.5
1. Specifications listed are for a standard unit, operating at +20°C fluid temperature, with
tap water as the cooling fluid.
2. Cooling capacity is based on a 10°C difference between the temperature of the cooling
water supply (house water) and the cooling fluid as it leaves the System I (see Section
III, Facility Water Requirements).
- 4 -
+5°C to +35°C
±1.0°C
3
4
5
6
7.5
12.5
18.0
25.0
33.0
1.0
3.8
25½ x 14¼ x 20½
64.7 x 36.2 x 52.1
7
Flow Rate (gpm)
Pressure (psi)
Advertisement
Table of Contents
