Preface; Compliance; Unpacking; Warranty - Neslab System I Liquid to Liquid Instruction And Operation Manual

Compliance

Unpacking

Warranty

After-sale Support

Preface

Products tested and found to be in compliance with the requirements defined
in the EMC standards defined by 89/336/EEC as well as Low Voltage Direc-
tive (LVD) 73/23/EEC can be identified by the CE label on the rear of the unit.
The testing has demonstrated compliance with the following directives:
LVD, 73/23/EEC
EMC, 89/336/EEC
For any additional information refer to the Letter of Compliance that shipped
with the unit (Declaration of Conformity).
Retain all cartons and packing material until the unit is operated and found to
be in good condition. If the unit shows external or internal damage, or does
not operate properly, contact the transportation company and file a damage
claim. Under ICC regulations, this is your responsibility.
Units have a one year warranty against defective parts and workmanship
from date of shipment. See back page for more details.
NESLAB is committed to customer service both during and after the sale. If
you have questions concerning the operation of your unit, contact our Sales
Department. If your unit fails to operate properly, or if you have questions
concerning spare parts or Service Contracts, please contact our Service
Department for assistance.
- 2 -
Complies with UL 3101-1:93
EN 55011, Class A Verification
EN 50082-1:1992
IEC 1000-4-2:1995
IEC 1000-4-3:1994
IEC 1000-4-4:1995