Warnings - Neslab System I Liquid to Liquid Instruction And Operation Manual

Section I Safety

Warnings

Make sure you read and understand all instructions and safety precautions
listed in this manual before installing or operating your unit. If you have any
questions concerning the operation of your unit or the information in this
manual, contact our Sales Department (see After-sale Support).
Observe all warning labels.
Never remove warning labels.
Never operate damaged or leaking equipment.
Never operate the unit without cooling fluid in the reservoir.
Always turn off the unit and disconnect the line cord from the power
source before performing any service or maintenance procedures.
Always empty the reservoir before moving the unit.
Always turn off the unit and disconnect the line cord from the power
source before moving the unit.
Never operate equipment with damaged line cords.
In addition to the safety warnings listed above, warnings are posted through
out the manual. These warnings are designated by an exclamation mark
inside an equilateral triangle with text highlighted in bold. Read and follow
these important instructions. Failure to observe these instructions can result
in permanent damage to the unit, significant property damage, or personal
injury or death.
- 3 -