Arboria VISTA ARBOR Assembly Instructions

GARDEN STRUCTURES
HARDWARE LIST
A
B
C
PARTS LIST
1
Gable
Canopy
3
2
TOOLS REQUIRED
Power screwdriver or drill
Tape measure
Concrete mix, 2 - 60 lb bags
Handy to have:
Level
Product ID 820.1325 / Instruction ID 445.35.14
Arboria is a division of LWO Corp. / PO Box 17125 / Portland, OR / Cust. Serv. 800-459-8718 / Fax 503-286-4092 / www.arboria.com
1" Screw
3" Screw
Stake kit
2 Side Panel
2
3
3
ASSEMBLY INSTRUCTIONS
VISTA ARBOR
REVIEW ALL STEPS BEFORE STARTING ASSEMBLY
PRELIMINARIES
NOTE: This arbor requires staking in concrete or a
Quantity
similarly secure medium. See page 4 for instructions.
Choosing not to secure the arbor may compromise the
(16)
structure's integrity.
Selecting a Work Area
Select an area close to where the arbor will be installed.
(8)
The assembly area should be relatively flat and open, at
least 8'x6'. A lawn, driveway or wide path will be satisfac-
tory. It is a good idea to lay out the arbor box on your work
surface to protect the arbor from nicks and scratches. Two
(1)
people are recommended to complete the assembly proc-
ess. Always use caution when assembling or moving the
arbor.
Optional Painting or Staining
If you wish to stain or paint your arbor, we recommend ap-
plying to individual components before assembly to ensure
fullest coverage. Use a high quality exterior stain or paint.
Be careful not to cover up pencil marks.
ASSEMBLED PRODUCT
1
Win FREE Arboria Products
Give us feedback about this Arboria product and
be entered into a drawing to win Arboria goods.
It's easy, go to www.Arboria.com, choose a prod-
uct then click on the link to review. Be sure to en-
ter your email and telephone so that we may con-
tact you if you win. Upload a photograph for an
extra chance to win.
cial rules. No purchase necessary.
Page 1 of 4
Visit www.Arboria.com for offi-
Updated 11/15/12