Switching Between The Cut Sheet Feeder And - Epson ActionPrinter 4000 User Manual

If the paper reaches the bottom of the print area when any of the
following line feed commands is used, the sheet in the printer is
automatically ejected and the next sheet is loaded.
LF:
VT:
ESC J:
Software is not effective while the printer is off line. Make sure that
the printer is on line if you wish to control the cut sheet feeder using
software commands.
Switching Between the Cut Sheet Feeder and Push Tractor
The printer lets you switch easily between the cut sheet feeder and
tractor-feeding systems without having to remove either the feeder
or the continuous paper supply.
1. Make sure the continuous paper is already loaded and in the
standby position. Next, press the ON LINE button to set the printer
off line.
Line feed; advances the paper one line
Vertical tab; advances the paper to the next
vertical tab position
Line feed; advances the paper n/180th of an inch
Using the Printer Options
The Cut Sheet Feeder
5-15