Removing The Protective Materials - Epson ActionPrinter 4000 User Manual

Removing the Protective Materials

The printer is protected during shipping by pieces of white packing
material. Also, the wide carriage printer is protected by a locking
clip, which must be removed before you turn on the printer.
0 I .
CAUTION: Before turning on the wide carriage printer,
be absolutely sure you have removed the locking clip.
Turning on the printer while the clip is attached may
seriously damage the mechanism.
Follow these steps to remove the protective materials.
1. Remove the printer cover.
2. Remove the pieces of white packing material. At this point, the
standard width printer is completely unpacked.
Unpacking the Printer
Setting Up the Printer 1-3