No
Item
23
24
25
(yellow highlight)
Cutting status display & setup
When cutting is in operation, press
4‐12
Function
Feeding length display
Blade speed display
Error display
to enter cutting status display and setup page.
Description
Displays current feeding length while the material is being
fed.
Displays current blade speed.
Displays error messages in the order of occurrences; press
the message for one second to clear the messages.
The message must be cleared for the machine to
continue to operate normally.
Page 1 – cutting status display
This page shows the following information (from
top to bottom):
Feeding length (current feeding vise
position)
Blade speed
Current in ampere (optional)
Number of current cutting job/step in
operation
Preset quantity of current cutting job
Number of cuts finished
The green square light on the bottom left
corner indicates the warranty status of the
HMI touch screen. Warranty is one year and
starts counting after 70 hours of operation
after the machine is shipped. Warranty
status light turning to red indicates the HMI
touch screen has expired.
Error messages (highlighted in yellow; can
be cleared by pressing down for one second)
Press Home to return to the main control menu.
Press Next to go to the next setup page.