Cleaning The Printer Case; Deleting The Epson Control Panel For Windows - Epson ActionLaser 1400 Reference Manual

Epson actionlaser 1400: user guide

Hide thumbs Also See for ActionLaser 1400:

Table of Contents

2. If a large amount of toner is present, use a small vacuum

cleaner (available from computer supply stores) to remove

it. Then carefully wipe with a clean, dry cloth.

Caution:

Toner or any other fine powder can damage some vacuum

cleaners. Be sure to read the instructions for your vacuum

cleaner before you use it on spilled toner.

Note:

If you spill toner on your clothing, rinse it off with cold water. Do not

use hot water; it may cause the toner to leave a permanent stain.

Cleaning the printer case

If the printer's outer case is dirty or dusty, turn off the printer

and clean it with a soft, clean cloth dampened with a mild

detergent.

Caution:

Never use alcohol or thinner to clean the printer's outer case;

these chemicals can damage the components and case. Be

careful not to get water on the printer mechanism or any

electronic components.

If you need to delete the EPSON Control Panel for Windows,

do the following:

1. Turn on the computer and start Windows.

2. From the Program Manager, choose Run in the File menu.

This brings up the Run dialog box.

3. In the Command Line text box, type C:\EPPRT\EPDELETE.

Troubleshooting 3-13

Table of Contents