Battery Status (Handle On Plugged In Charger) - Philips Colgate SonicPro 70 Manual

Note: The charging travel case requires a USB adapter to charge the
handle. The USB adapter is not included.
Connect the charging travel case to 5V DC input power either from:
1
- a UL-listed or certified to ANSI/UL 60950-1 personal computer's
standard USB connector or,
- a UL-listed or certified to ANSI/UL 60950-1 LPS power supply with
USB output port or,
- a UL-listed or certified 1310 Class 2 power supply.
The USB adapter must be a safe extra low voltage source,
compatible with the electrical ratings marked on the bottom of
the device.
2 The travel case charges your toothbrush until it is fully charged.
- When fully charged, all battery lights light up green.
Note: Charging the handle with the charging travel case may take longer
than on the charger.

Battery status (handle on plugged in charger)

When the handle is placed on the charger or travel case, the battery
indicator lights flash green based on the current battery level.
Number of flashing lights
1
2
3
Note: When the handle is fully charged, the three battery indicator lights
light up green. After 30 seconds the battery indicator lights switch off.
Battery charge level
Low
Medium
High
17
English