Care And Maintenance; Troubleshooting - Kobalt 3DPCWB2013 Assembly Instructions Manual

CARE AND MAINTENANCE

Cleaning
1. Clean using a mild liquid soap, rinse with clean water and dry thoroughly. Do not clean with
abrasive detergents.
2. Clean off water or other liquids spilled or splashed on the workbench immediately and dry the
unit thoroughly.
3. Keep your workbench covered to protect it from dust and moisture that could potentially damage
the unit.

TROUBLESHOOTING

PROBLEM
The tools plugged into the
power strip do not work.
The light does not work.
POSSIBLE CAUSE
The power cord plugs are
loose.
The lamp tube is old.
1. The lamp plug is loose.
2. The lamp tube is old.
14
CORRECTIVE ACTION
Ensure the power cord plugs
are plugged in properly.
Replace the lamp tube.
1. Ensure the power cord plug is
plugged in properly.
2. Replace the lamp tube.