Replacing Ink Cartridges - Epson Stylus NX430 Quick Manual

Replacing Ink Cartridges

Make sure you have a new ink cartridge before you begin. You must install new cartridges
immediately after removing the old ones.
Caution: Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Note: Leave the expended cartridge installed until you have obtained a replacement, or
the ink remaining in the print head nozzles may dry out.
1. Turn on your printer.
2. If an ink cartridge is expended, you see a message on the
LCD screen. Note which cartridges need to be replaced
and press .
OK
If a cartridge is expended, you must replace it to be able to
print. If a cartridge is low, you can continue printing until
a cartridge needs replacement.
If you're replacing a cartridge before you see a message on
the LCD screen, press
Select
Maintenance
Replacement
3. Lift up the scanner.
4. Squeeze the tab on the cartridge and lift it up. Dispose of it
carefully. Do not take the used cartridge apart or try to refill it.
Warning: If ink gets on your skin, wash it off with soap and
water. If ink gets in your eyes, flush them immediately with
water. If it gets in your mouth, spit it out and see a doctor
right away.
if necessary and select
, then select
Ink Cartridge
and press .
OK
.
F Setup
Replacing Ink Cartridges
19