JVC LX-N68BC Service Manual page 9

5.3 LED Error Message
light on RED
flash a Red light
light on GREEN
flash a GREEN light
light on ORANGE
flash a ORANGE light
LIGHT TEMP POWER
System Messages
Light source error Messages
Thermal error Messages
STATUS
System is in stand-by mode
System is powering up
System is under normal operation
System is cooling down
Downloading
Colorwheel start fail
Colorwheel spin fail
Scaler reset fail (data abort)
Light source life exhausted
Light source error in normal oper-
ation
Light source is not lit up
Fan 1 error (the actual fan speed
is outside the desired speed)
Fan 2 error (the actual fan speed
is outside the desired speed)
Fan 3 error (the actual fan speed
is outside the desired speed)
Fan 4 error (the actual fan speed
is outside the desired speed)
Fan 5 error (the actual fan speed
is outside the desired speed)
Fan 6 error (the actual fan speed
is outside the desired speed)
Temperature 1 error (over limited
temperature)
(No.PA063<Rev.001>)1-9