XTR4 II Elliptical Cross Trainer
Care, Maintenance and Troubleshooting
Some maintenance activities described may be beyond the scope of some users. For
procedures that you are not comfortable with or have the tools or experience for, have the
unit serviced by a service centre or qualified technician.
Cleaning
The equipment can be cleaned with a soft cloth and mild detergent. Do not use abrasives, solvents or harsh
chemicals. Be careful not to get excessive moisture on the display panel as this may damage it.
After each use, wipe the unit of any sweat, dirt or liquids. Keep the equipment, especially the display
console, out of direct sunlight to prevent damage to the screen.
Storage
Store the equipment in a clean and dry indoor environment. Never leave or use the unit outdoors.
Troubleshooting
The following information may assist in identifying a problem and rectifying it.
Problem
Pedals or handles
tight or making
noise.
Console not working.
When to Call for Help
This equipment is designed with user safety as a priority. In the event of equipment failure, call an authorized
service centre or technician for servicing.
Specifications
Weight Capacity
E&OE
Potential Reason
A. Pedal bolts or retaining
screws too tight.
B. Pivots require lubricating.
A. Batteries no longer
serviceable.
B. Connection problem.
C. Console problem.
100kg
©2018 Proflex
Correction
A. Loosen fasteners so that wave washers are
not compressed flat. For pedal bolts, hold bolts in
positions when tightening nuts.
B. Disassemble pivots, clean components, then
smear with grease before reassembling.
A. Replace batteries.
B. Check all connections are secure and wiring is
not pinched or damaged. Replace is necessary.
C. Replace console.
11