Operation - Bauer 20115E-B Owner's Manual & Safety Instructions

Operating instructions
read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
General Operation
cord Hook
1. An extension cord (sold separately) will be
required. Ensure that the extension cord is an
outdoor type extension cord and that it is the
correct design to accept this appliance's plug.
2. WarninG!
tO prEVEnt ELEctric SHOcK anD
SEriOuS pErSOnaL inJury:
the extension cord must remain
secured to the appliance's plug.
adjust Shaft Height
Adjust height as necessary by pressing down on Height Adjustment Lock, pulling Lower
Shaft out to desired length, then releasing Lock to secure Shaft in place.
adjust trimmer Head angle
Adjust head angle by pressing the Head Angle Button, moving Trimmer Head
until desired angle is achieved, then releasing button. See below.
rotate Shaft
and releasing Angle Lock. The Upper Shaft will click into place.
Item 57610
Lower
Shaft
For technical questions, please call 1-888-866-5797.
3. Secure the extension cord
using the cord hook
as explained below.
a. Make a loop in the
extension cord, and
press that cord loop
through the hole
in the handle.
b. Hook that cord loop
around the cord hook.
c. Make sure the Trigger is released,
then plug the cord into the connector.
E
Height
adjustment
Lock
Head angle
Button
Page 9