Download
Share
Print this page
Bauer Hypermax Lithium 19115C-B Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Bauer Manuals
  4. Trimmer
  5. Hypermax Lithium 19115C-B
  6. Owner's manual & safety instructions

Bauer Hypermax Lithium 19115C-B Owner's Manual & Safety Instructions

12" string trimmer
Hide thumbs Also See for Hypermax Lithium 19115C-B:

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2019 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19b

Advertisement

loading

Related Manuals for Bauer Hypermax Lithium 19115C-B

Summary of Contents for Bauer Hypermax Lithium 19115C-B

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Table Of Contents

    table of contents Safety ................2 Maintenance .............12 Specifications ............5 Parts List and Diagram ..........14 Setup .................7 Warranty ..............16 Operation ..............10 WarninG SyMBOLS anD DEFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

  • Page 3: Safety

    personal Safety 1. Stay alert, watch what you are doing 4. Do not overreach. Keep proper footing and and use common sense when operating balance at all times. This enables better control a power tool. Do not use a power of the power tool in unexpected situations.
  • Page 4 Service Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. String trimmer Safety 1. use both hands when operating the String 13. Avoid unintentional starting. trimmer.

  • Page 5: Save These Instructions

    3. CAUTION - To reduce risk of injury, 8. Do not open or mutilate the battery. Released charge only li-ion Bauer-type rechargeable electrolyte is corrosive and may cause damage to batteries. Other types of batteries may burst the eyes or skin.

  • Page 6: Specifications

    Do not puncture, short, or open safety goggles with side shields. battery packs and do not charge damaged battery packs. Specifications Battery Type 20V Bauer Li-Ion No Load Speed 8100 RPM Replacement Line Type 0.065" Nylon Page 6 For technical questions, please call 1-888-866-5797.

  • Page 7: Setup

    Setup - Before use: read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Functions trigger Safety Lock Handle trigger auxiliary Handle upper Shaft auxiliary Handle...
  • Page 8 assembly tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn: Make sure that the trigger is in the off-position and remove the Battery pack before performing any procedure in this section. note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
  • Page 9 Forward and reverse trimming Wheel Setup Wheel assembly 1. Turn the Trimmer upside down. Slide the Wheel Assembly horizontally with wheels facing forward onto the Metal Plate Guard located on the underside of the Guard. Make sure the Wheel Assembly locks onto the Plate ...

  • Page 10: Trimmer Operation

    Battery pack before setting up the tool. charging Battery pack Charge Battery Pack according to the instructions included with the 20  V Bauer Battery Charger (both sold separately). automatic Line Feeder nOticE: to prevent damage to trimmer, 2. If Trimmer is not cutting correctly, Spool may DO nOt BuMp SpOOL HOuSinG On GrOunD.
  • Page 11 Edger Operation 1. Remove Battery Pack. 7. Install fully charged Battery Pack. 2. Place the Wheel Assembly in the proper 8. Put on safety goggles. position for edging operation. Refer to nOticE: to prevent damage to tool or property, Edger Wheel Setup on page 8. avoid contact with fences, trees, shrubs and the like.

  • Page 12: Maintenance

    Maintenance and Storage procedures not specifically explained in this manual must be performed only by a qualified technician. tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn Or ELEctric SHOcK: release the trigger and remove the Battery pack before performing any inspection, maintenance, or cleaning procedures. tO prEVEnt SEriOuS inJury FrOM tOOL FaiLurE: Do not use damaged equipment.
  • Page 13 replacing nylon Line tO prEVEnt SEriOuS inJury: Only replace the line on this tool with the line material and diameter of line listed on the Specifications table. Other materials, such as wire, rope, or blades can damage the tool and be forcefully and dangerously ejected from the tool upon breaking. 1.

  • Page 14: Parts List And Diagram

    parts List and Diagram pLEaSE rEaD tHE FOLLOWinG carEFuLLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
  • Page 15 assembly Diagram Item 64995 For technical questions, please call 1-888-866-5797. Page 15...

  • Page 16: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.